WindSensor P2546C-OPR Cup Anemometer


The WindSensor P2546-OPR Cup Anemometer combines unrivaled performance with the only IEC 61400-12-1 compliant classification on the market. Originally designed for marine environments, the P2546-OPR is ideally suited for wind resource assessment and power performance studies both onshore and offshore.

WindSensor offers two versions of the P2546-OPR sensor. This version, the P2546C-OPR (coil version), features permanent magnets mounted on the shaft that induce a sine wave voltage inside a coil. This produces an output signal with frequency proportional to wind speed.

We also offer the P2546A-OPR reed switch version.

P2546-OPR features

  • One-piece rotor anemometer head (OPR)
  • Durable construction with anodized aluminum and stainless steel
  • Low threshold speed
  • Short distance constant
  • Negligible overspeeding
  • Angular response independent of wind speed
  • Fully tested temperature performance
  • Symmetrical geometry
  • No external power source
  • MEASNET calibrated


Sensor type 3-cup anemometer
Applications Wind resource assessment
Power performance measurements
Meteorological and environmental monitoring
Response characteristics
Calibration Each anemometer individually calibrated compliant with IEC 61400-12-1
Calibration, mean value U = 0.620 x f + 0.217 [m/s]
Variation of calibrations σ = 0.015 m/s @ 10 m/s
Distance constant (63% recovery) 1.81 ± 0.04 m
Starting threshold < 0.4 m/s
Resolution 0.001 m/s @ 10-minute average mode
Range 0...75 m/s
Output signal
Signal type Low-level AC sine wave, frequency proportional to wind speed
Output voltage at 0.4 m/s 25 mV peak, minimum
Output voltage at 75 m/s 14 V peak, typical
Output resistance 650 ± 50 Ω
Calibration uncertainty, uV1, k=1 0.28 % @ 4…16 m/s
Classification uncertainty, uV2, k=1
Class number Operational standard uncertainty @ 10 m/s
1.32A 0.076 m/s
3.71B 0.214 m/s
1.54C 0.089 m/s
3.76D 0.217 m/s
0.03...3.76S 0.002...0.217 m/s
Power supply
P2546C-OPR Self-excited, no external power supply required
Operating temperature range -38...60 °C
Operating humidity range 0...100 % RH
EMC compliance EN61326-1 Class A
Exterior materials Anodized aluminum, Stainless steel and GRP
Mating cable connector Lemo E Series FFA.1E.650.CTAC45 (cable diameter 4.1…4.7 mm)
Overall height 282 mm
Swept diameter of rotor 188 mm
Weight 0.40 kg
Shipping weight / dimensions 1.15 kg / Cardboard box 360 x 230 x 210 mm
Mounting Onto a 25 ± 0.1 mm (0.984 inch) diameter mast with two set screws
Tools required 4mm Allen wrench (enclosed)


Specifications documents

Application notes

External documentation

RNRG Symphonie dataloggers - P2546-OPR Anemometer Wiring and Installation Information

RNRG SymphoniePRO datalogger - User's Manual

RNRG SymphoniePlus3 datalogger - User's Manual

To place an order or inquire about this product,
please submit an online order or inquiry or contact us.