Windsensor - reducing uncertainty
S
Lang
  • English
  • 中文
  • Products
  • FAQ
  • Class Calculator
  • Inquiry/Order
  • Contact

Back to albums

Don't

Don't turn your tower into a bird's nest. And don't turn the datalogger enclosure into a beehive. Don't aim at the anemometer with your shot gun!<br>Wind station in rural New South Wales, Australia. Don't violate the calibration by using a geometry of the stub mast different from that used during calibration. Don't forget your helmet. Don't fence in your anemometer. Don't perform unauthorized lubrication. Don't add obstructions on the support post. And don't add obstructions on the anemometer. Don't put adhesive tape on your anemometer Don’t forget aligning your sensors, and don’t deploy non-axial symmetric sensors conflicting with the IEC 61400-12-1 Don’t forget aligning your sensors, and don’t deploy non-axial symmetric sensors conflicting with the IEC 61400-12-1 Just DO it ! Use axis symmetric sensors and mounting according to IEC 61400-12-1 Just don't !
shadow

Product information

  • P2546A-OPR Cup Anemometer
  • P2546C-OPR Cup Anemometer
  • P2546D-OPR Cup Anemometer
  • Technical literature
  • Frequently asked questions (FAQ)
  • Class Calculator
  • Inquiry/Order
  • Photo Gallery

Company

  • About WindSensor
  • Media kit
  • Privacy policy
  • Contact form & Google Map
  • Visiting WindSensor
  • Follow us on LinkedIn
  • Visit our YouTube channel

Contact us

WindSensor
DTU Risø Campus
Frederiksborgvej 399
DK-4000 Roskilde
Denmark
windsensor(at)windsensor.com

Phone
DK +45 46 77 55 25
US +1 646 233-3463

VAT No. DK29212066