Windsensor - reducing uncertainty
S
Lang
  • English
  • 中文
  • 产品概述
  • 常见问题
  • 等级计算
  • 咨询/订货
  • 联系

Back to albums

Don't

Don't turn your tower into a bird's nest. And don't turn the datalogger enclosure into a beehive. Don't aim at the anemometer with your shot gun!<br>Wind station in rural New South Wales, Australia. Don't violate the calibration by using a geometry of the stub mast different from that used during calibration. Don't forget your helmet. Don't fence in your anemometer. Don't perform unauthorized lubrication. Don't add obstructions on the support post. And don't add obstructions on the anemometer. Don't put adhesive tape on your anemometer Just don't ! Don’t forget aligning your sensors, and don’t deploy non-axial symmetric sensors conflicting with the IEC 61400-12-1 Don’t forget aligning your sensors, and don’t deploy non-axial symmetric sensors conflicting with the IEC 61400-12-1 Just DO it ! Use axis symmetric sensors and mounting according to IEC 61400-12-1
shadow

产品概述

  • WindSensor P2546A-OPR杯式风速计
  • WindSensor P2546C-OPR杯式风速计
  • WindSensor P2546D-OPR杯式风速计
  • 技术文献
  • 常见问题
  • 等级计算
  • 咨询/订货
  • 图库

公司

  • 关于WindSensor
  • 历史记录和隐私保护
  • 中国的联系方式
  • 在领英关注我们
  • 关注我们的YouTube频道

联系我们

WindSensor
DTU Risø Campus
Frederiksborgvej 399
DK-4000 Roskilde
Denmark
windsensor(at)windsensor.com

Phone
DK +45 46 77 55 25
US +1 646 233-3463

VAT No. DK29212066